![\"HowToStep01\"](\"http:\/\/www.tenfourmagazine.com\/content\/wp-content\/uploads\/2015\/12\/HowToStep01.jpg\")
<\/a><\/p>\nSTEP 2: Twist the cap off the filter assembly. Remove the 4 inner nuts to remove the screen assembly and then place the screen on a sturdy work surface\/bench.<\/p>\n
STEP 3: Measure desired height down from the top of the screen and then mark it (we are removing 2 inches). Use tape to identify a straight line for cutting the screen.<\/p>\n STEP 4: Use a grinder with a cutoff wheel to make the necessary cut (wear eye protection). Also, use grinder to split the screen from the cap\u2019s fastening ring.<\/p>\n STEP 5: Drill out the spot welds that fasten the screen to the ring.<\/p>\n STEP 6: Separate the ring from the screen using a flat-head screwdriver.<\/p>\n STEP 7: De-burr the edges of the screen and remove any uneven edges.<\/p>\n STEP 8: Use a rubber mallet to drive the ring into the shortened screen.<\/p>\n STEP 9: Spot weld the screen back onto the fastening ring (or have your local welding shop do it).<\/p>\n STEP 10: Secure screen to filter body with 4 nuts and then put the cap back on the filter assembly.<\/p>\n STEP 11: Carefully install them back to the side of the cab the same way they were originally installed.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n